Find a Service Center
Alternate Products
- 01 Series Pillow Block
- 35 mm Shaft
- 2 3/8" Centerline to Base
- 9" Base Length
- 7 1/8" Bolt Centers
description
- All grooved outer races must be clamped axially
applications
- Conveyors
- Mechanical handling
- Electrical machinery
- Fans
- Haulage
- Winders
- Headgear
- Marine
- Paper manufacturing
caution
- Any sliding spool valve, if held for long periods of time, may stick and not spring return due to fluid residue formation and therefore should be cycled periodically to prevent this from happening
| Insert Type | Split Steel Insert |
| Base Width | 2 3/8 in |
| Base Length | 9 in |
| Base Height | 7/8 in |
| Housing Construction | 2 Piece |
| Housing Height | 5 1/2 in |
| Static Load Rating [Max] | 15100 lbf |
| Bolt Holes | 2 |
| Seal Type | Triple Labyrinth Seals |
| Bolt Hole Spacing Range [Max] | 7 1/2 in |
| Inch/Metric | Metric |
| Pillow Block Type | Thru-Bolt |
| Lubrication | Relubricatable |
| Bolt Size | 1/2 in |
| Bolt Hole Spacing Range [Min] | 6 3/4 in |
| Series | 01 Series |
| Dynamic Load Rating | 14600 lbf |
| Temperature Range [Min] | 32 °F |
| Bearing Type | Split Cylindrical |
| Locking Device | Clamping Ring Collar |
| Axial Load | 720 lbf |
| End Type | Open End |
| Shaft Dia. | 35 mm |
| Housing Material | Cast Iron |
| RPM [Max] | 5400 rpm |
| Mounted Unit Duty | Heavy-Duty |
| Bolt Hole Spacing | 7 1/8 in |
| Pedestal | P 01 |
| Temperature Range [Max] | 212 °F |
| Bearing Design | Expansion |
| Weight | 11.858 LB |
| EAN or UPC | 7316577841971 |
