Find a Service Center
Alternate Products
- 01 Series Pillow Block
- 35 mm Shaft
- 2 3/8" Centerline to Base
- 9" Base Length
- 7 1/8" Bolt Centers
description
- All grooved outer races must be clamped axially
applications
- Conveyors
- Mechanical handling
- Electrical machinery
- Fans
- Haulage
- Winders
- Headgear
- Marine
- Paper manufacturing
caution
- Any sliding spool valve, if held for long periods of time, may stick and not spring return due to fluid residue formation and therefore should be cycled periodically to prevent this from happening
| Bearing Type | Split Cylindrical |
| Locking Device | Clamping Ring Collar |
| End Type | Open End |
| Housing Height | 5 1/2 in |
| RPM [Max] | 5400 rpm |
| Bolt Holes | 2 |
| Housing Material | Cast Iron |
| Bolt Hole Spacing | 7 1/8 in |
| Bolt Size | 1/2 in |
| Shaft Dia. | 35 mm |
| Bolt Hole Spacing Range [Max] | 7 1/2 in |
| Insert Type | Split Steel Insert |
| Base Length | 9 in |
| Bearing Design | Non-Expansion |
| Temperature Range [Min] | 32 °F |
| Bolt Hole Spacing Range [Min] | 6.75 |
| Axial Load | 720 lbf |
| Pillow Block Type | Thru-Bolt |
| Base Height | 7/8 in |
| Lubrication | Relubricatable |
| Housing Construction | 2 Piece |
| Static Load Rating [Max] | 15100 lbf |
| Mounted Unit Duty | Heavy-Duty |
| Temperature Range [Max] | 212 °F |
| Base Width | 2 3/8 in |
| Pedestal | P 01 |
| Seal Type | Triple Labyrinth Seals |
| Inch/Metric | Metric |
| Dynamic Load Rating | 14600 lbf |
| Series | 01 Series |
| Weight | 11.902 LB |
| EAN or UPC | 7316577841988 |
