Find a Service Center
Alternate Products
- 01 Series Pillow Block
- 2 3/4" Shaft
- 3 3/4" Centerline to Base
- 13" Base Length
- 10 5/8" Bolt Centers
description
- All grooved outer races must be clamped axially
applications
- Haulage
- Winders
- Headgear
- Marine
- Fans
- Conveyors
- Mechanical handling
- Electrical machinery
- Paper manufacturing
caution
- Any sliding spool valve, if held for long periods of time, may stick and not spring return due to fluid residue formation and therefore should be cycled periodically to prevent this from happening
| Bearing Type | Split Cylindrical |
| Bolt Hole Spacing Range [Max] | 11 in |
| Temperature Range [Max] | 212 °F |
| Dynamic Load Rating | 29200 lbf |
| Series | 01 Series |
| Insert Type | Split Steel Insert |
| Axial Load | 1710 lbf |
| Housing Construction | 2 Piece |
| Temperature Range [Min] | 32 °F |
| Bearing Design | Expansion |
| Static Load Rating [Max] | 35300 lbf |
| Bolt Size | 3/4 in |
| Seal Type | Triple Labyrinth Seals |
| Bolt Hole Spacing Range [Min] | 10 1/4 in |
| Bolt Hole Spacing | 10 5/8 in |
| Mounted Unit Duty | Heavy-Duty |
| Base Width | 3 in |
| Shaft Dia. | 2.75 in |
| Lubrication | Relubricatable |
| RPM [Max] | 3310 rpm |
| Housing Height | 8 1/8 in |
| Housing Material | Cast Iron |
| Pillow Block Type | Thru-Bolt |
| End Type | Open End |
| Locking Device | Clamping Ring Collar |
| Inch/Metric | Inch |
| Base Length | 13 in |
| Pedestal | P 04 |
| Base Height | 1 1/2 in |
| Bolt Holes | 2 |
| Weight | 33.616 LB |
| EAN or UPC | 7316579385640 |
