Find a Service Center
description
- These bearings were developed to minimize operating temperatures, noise and vibration in dynamometer applications. To achieve best results, the value of eccentricity marked on the inner ring face should be aligned 180° opposite the high point of eccentricity measured at the shaft journal.
features
- Special internal radial clearance
- High speed
- Lightweight
- Inner ring land-guided phenolic separators
- Special E grade balls
- ABEC 5 inner ring tolerance
- Inner ring eccentricity value marked on inner ring face at the location of maximum lateral runout
| O.D. Type | Straight |
| Ball Material | Steel |
| Bore Type | Round Bore |
| Enclosure | Open |
| Inch/Metric | Metric Bore |
| Lubricant | Oil Preservative |
| Radial Internal Clearance Specification | Special Radial Clearance |
| Seal Material | None |
| Preload Level | None |
| Snap Ring | No Snap Ring |
| Rows of Balls | Single |
| No. in Set | Single Bearing |
| Material | Steel |
| Precision Level | Medium Precision (ABEC 5) |
| Temperature Range [Max] | 225 °F |
| Cage Material | Phenolic |
| Contact Angle | 15° |
| Seal Type | Unsealed |
| Capacity | Maximum Capacity |
| Locking Device | No Locking Device |
| Bearing Type | Dynamometer |
| Weight | 0.0 LB |
