Find a Service Center
- Deep Groove Bearing
- 1.77 in Inner Diameter
- 3.94 in Outer Diameter
- 0.98 in Width
- Bearing Steel Material
applications
- Used with very heavy radial loads, or a combination of radial and thrust loads where the radial load is predominant
features
- Consists of single-row maximum capacity filling-notch bearings with bores ranging from 17 mm to 110 mm 102175970
- 1
- Maximum radial load-carrying capacity
- Type and material available is a two-piece, pressed steel, ball riding, stayrod cage
caution
- Any sliding spool valve, if held for long periods of time, may stick and not spring return due to fluid residue formation and therefore should be cycled periodically to prevent this from happening
| Inch/Metric | Metric |
| Seal Type | Unsealed |
| Dynamic Load Rating | 13400 lbf |
| Lubricant | Oil Preservative |
| Limiting Speed - Oil | 7000 rpm |
| icNumber | 7699749 |
| Temperature Range [Max] | 450 °F |
| Pre Lubricant | None |
| Locating | Snap Ring Fitted |
| Origin | Single Row Radial |
| Ball Material | Steel |
| Cage Type | Metal |
| Outer Ring Width | 0.98 in, 25 mm |
| Series | 63 |
| Seal Material | None |
| O.D. Type | Cylindrical |
| Precision | Standard |
| Precision Level | Standard (ABEC 1) |
| Snap Ring | With Snap Ring |
| Static Load Rating [Max] | 10500 lbf |
| Preload Level | None |
| Radial Internal Clearance | Normal |
| Width | 0.98 in, 25 mm |
| No. in Set | Single Bearing |
| Radial Internal Clearance Specification | Normal Clearance |
| Locking Device | No Locking Device |
| Material | Bearing Steel |
| Cage Material | Bearing Steel |
| Inner Ring Width | 0.98 in, 25 mm |
| Bore Type | Cylindrical |
| O.D. | 3.94 in, 100 mm |
| Fillet Radius | 1.5 mm |
| Enclosure | Open |
| Rows of Balls | Single |
| Bearing Type | Deep Groove |
| I.D. | 1.77 in, 45 mm |
| Contact Angle | 0° |
| Capacity | Maximum Capacity |
| Limiting Speed - Grease | 5700 rpm |
| Weight | 2.037 LB |
| EAN or UPC | 97741007894 |
