Find a Service Center
- Deep Groove Bearing
- 1.77 in Inner Diameter
- 3.94 in Outer Diameter
- 0.98 in Width
- Bearing Steel Material
applications
- Used with very heavy radial loads, or a combination of radial and thrust loads where the radial load is predominant
features
- Consists of single-row maximum capacity filling-notch bearings with bores ranging from 17 mm to 110 mm 102175970
- 1
- Maximum radial load-carrying capacity
- Type and material available is a two-piece, pressed steel, ball riding, stayrod cage
caution
- Any sliding spool valve, if held for long periods of time, may stick and not spring return due to fluid residue formation and therefore should be cycled periodically to prevent this from happening
| Preload Level | None |
| Origin | Single Row Radial |
| Seal Material | None |
| Inch/Metric | Metric |
| Precision | Standard |
| Lubricant | Oil Preservative |
| Rows of Balls | Single |
| Outer Ring Width | 0.98 in, 25 mm |
| Contact Angle | 0° |
| Inner Ring Width | 0.98 in, 25 mm |
| No. in Set | Single Bearing |
| I.D. | 1.77 in, 45 mm |
| Width | 0.98 in, 25 mm |
| Cage Material | Bearing Steel |
| Cage Type | Metal |
| Precision Level | Standard (ABEC 1) |
| O.D. Type | Cylindrical |
| Series | 63 |
| Locking Device | No Locking Device |
| Seal Type | Unsealed |
| Limiting Speed - Grease | 5700 rpm |
| Capacity | Maximum Capacity |
| Bearing Type | Deep Groove |
| Enclosure | Open |
| Static Load Rating [Max] | 10500 lbf |
| Bore Type | Cylindrical |
| Locating | Snap Ring Fitted |
| Dynamic Load Rating | 13400 lbf |
| Fillet Radius | 1.5 mm |
| Snap Ring | With Snap Ring |
| Pre Lubricant | None |
| Temperature Range [Max] | 450 °F |
| Ball Material | Steel |
| O.D. | 3.94 in, 100 mm |
| Material | Bearing Steel |
| Radial Internal Clearance | Normal |
| Radial Internal Clearance Specification | Normal Clearance |
| Limiting Speed - Oil | 7000 rpm |
| icNumber | 7699749 |
| Weight | 2.037 LB |
| EAN or UPC | 97741007894 |
