- Single Row Angular Contact Bearing, 40 mm ID x 80 mm OD x 18 mm Wide, Open, Standard Precision (ABEC 1), Brass / Bronze Cage, Normal Clearance (C0), 40° Contact Angle
features
- MRC angular contact bearings with a PJ suffix have one heavy race shoulder on the outer ring, opposing one heavy race shoulder and on recessed race shoulder on the inner ring. Because of this construction, it is possible for this bearing to incorporate a
- 7000-PJ bearings are particularly suitable for positions where the thrust is always present in one direction. It should not be used where the bearing is subjected to radial load only, or combined radial and thrust load where the radial load is predominant
- 7000-PJ bearings are available with either peressed brass or machined brass, ball centered cages. The low shoulder diameters on the nonthrust sides of inner and outer rings, combined with large clearances between the land diameters and the cage, allow fo
- ABEC Grade 3 bore tolerances reduce the range of interference fits between the shaft and bearing bore. These tighter tolerances result in closer control of preload and minimize the risk of thermal runaway.
- 7200-PJ and PJD Series bearings are used for heavy one-directional thrust loads or combined radial and thrust loads where thrust is predominant.
| Precision | Standard |
| Dynamic Load Rating | 36.4 kN |
| Limiting Speed - Grease | 7700 rpm |
| Limiting Speed - Oil | 10000 rpm |
| Contact Angle | 40 Degree |
| No. in Set | Single Bearing |
| Radial Internal Clearance Specification | Normal Clearance |
| I.D. | 1.57 in, 40 mm |
| Enclosure | Open |
| Outer Ring Width | 0.71 in, 18 mm |
| Static Load Rating | 26 kN |
| Locking Device | No Locking Device |
| Origin | Single Row Angular Contact |
| Lubricant | Oil Preservative |
| icNumber | 7695814 |
| Fillet Radius | 1 mm |
| Cage Material | Bearing Steel |
| Rows of Balls | Single |
| O.D. | 3.15 in, 80 mm |
| Snap Ring | No Snap Ring |
| Internal Design | Universal Mounting |
| Bore Type | Cylindrical |
| O.D. Type | Cylindrical |
| Static Load Rating [Max] | 5130 lbf |
| Radial Internal Clearance | Normal |
| Capacity | Standard Capacity |
| Bearing Type | Unmounted, Angular Contact |
| Precision Level | Standard (ABEC 1) |
| Preload Level | Light |
| Inch/Metric | Metric |
| Inner Ring Width | 0.71 in, 18 mm |
| Seal Material | None |
| Seal Type | Unsealed |
| Flush Ground | Yes |
| Material | Bearing Steel |
| Temperature Range [Max] | 450 °F |
| Cage Type | Metal |
| Width | 0.71 in, 18 mm |
| Ball Material | Steel |
| Series | 7200PJ |
| Weight | 0.913 LB |
| EAN or UPC | 97741016483 |

