- Single Row Angular Contact Bearing, 45 mm ID x 85 mm OD x 19 mm Wide, Open, Standard Precision (ABEC 1), Brass / Bronze Cage, Normal Clearance (C0), 40° Contact Angle
features
- MRC angular contact bearings with a PJ suffix have one heavy race shoulder on the outer ring, opposing one heavy race shoulder and on recessed race shoulder on the inner ring. Because of this construction, it is possible for this bearing to incorporate a
- 7000-PJ bearings are particularly suitable for positions where the thrust is always present in one direction. It should not be used where the bearing is subjected to radial load only, or combined radial and thrust load where the radial load is predominant
- 7000-PJ bearings are available with either peressed brass or machined brass, ball centered cages. The low shoulder diameters on the nonthrust sides of inner and outer rings, combined with large clearances between the land diameters and the cage, allow fo
- ABEC Grade 3 bore tolerances reduce the range of interference fits between the shaft and bearing bore. These tighter tolerances result in closer control of preload and minimize the risk of thermal runaway.
- 7200-PJ and PJD Series bearings are used for heavy one-directional thrust loads or combined radial and thrust loads where thrust is predominant.
| Limiting Speed - Oil | 9500 rpm |
| Cage Type | Metal |
| Precision Level | Standard (ABEC 1) |
| Inch/Metric | Metric Bore |
| Locking Device | No Locking Device |
| Static Load Rating [Max] | 5220 lbf |
| Width | 19.000 mm |
| Seal Material | None |
| Lubricant | Oil Preservative |
| O.D. Type | Straight |
| Origin | Single Row Angular Contact |
| Preload Level | None |
| Rows of Balls | Single |
| Radial Internal Clearance | Normal |
| Enclosure | Open |
| Static Load Rating | 28 kN |
| Cage Material | Brass/Bronze |
| Bearing Type | Angular Contact |
| Outer Ring Width | 19 mm |
| Temperature Range [Max] | 450 °F |
| Dynamic Load Rating | 6900 lbf |
| Internal Design | Universal Mounting |
| Precision | Standard |
| I.D. | 45 mm |
| icNumber | 7695829 |
| Capacity | Standard Capacity |
| Contact Angle | 40° |
| Limiting Speed - Grease | 7300 rpm |
| O.D. | 85 mm |
| Material | Steel |
| Ball Material | Steel |
| Radial Internal Clearance Specification | Normal Clearance |
| Bore Type | Round Bore |
| Inner Ring Width | 19 mm |
| No. in Set | Single Bearing |
| Series | 7200PJ |
| Flush Ground | Yes |
| Snap Ring | No Snap Ring |
| Seal Type | Unsealed |
| Fillet Radius | 1 mm |
| Weight | 1.003 LB |
| EAN or UPC | 97741016520 |

