Find a Service Center
Alternate Products
MRC Bearing Service
8222
8000 Series PumPac® 40°/15° Angular Contact Ball Bearing Set
Item #100757230
- Single Row Angular Contact Bearing, 110 mm ID x 200 mm OD x 38 mm Wide, Open, Standard Precision (ABEC 1), Brass / Bronze Cage, Normal Clearance (C0), 40° Contact Angle, Duplex (2) Set
features
- MRC 7000-P Series bearings are similar in design to 7000 Series bearings, but the 7000-P Series bearings have features that give them a greatly increased thrust capacity. They are especially recommended for those applications where maximum thrust capacity
- This heavy-duty angular contact bearing series is designed with an optimum ball complement and race groove depth and have a 40° contact angle
- 7000-P bearings are restricted to applications involving primarily thrust loads. They should not be used where the bearing will be subjected to radial load exclusively, or combined radial and thrust load where the radial load is predominant.
- Furnished in one-piece machined bronze, phenolic composition or special material riding ground OD of inner ring.
- 7200-P Light Series bearing are available in bore sizes ranging from 10 mm to 200 mm. They are used with heavy one-directional thrust loads, or combined radial and thrust loads where the thrust load is predominant.
| Material | Bearing Steel |
| Rows of Balls | Single |
| Limiting Speed - Grease | 2600 rpm |
| Temperature Range [Max] | 450 °F |
| icNumber | 7699063 |
| Enclosure | Open |
| Seal Type | Unsealed |
| I.D. | 4.33 in, 110 mm |
| O.D. | 7.87 in, 200 mm |
| Capacity | Standard Capacity |
| Cage Material | Brass |
| O.D. Type | Cylindrical |
| Static Load Rating | 156 kN |
| No. in Set | Duplex Set |
| Outer Ring Width | 1.5 in, 38 mm |
| Seal Material | None |
| Preload Level | Light |
| Ball Material | Steel |
| Fillet Radius | 2 mm |
| Contact Angle | 40 Degree |
| Precision | Standard |
| Internal Design | Universal Mounting |
| Cage Type | Metal |
| Bore Type | Cylindrical |
| Series | 7200P |
| Radial Internal Clearance Specification | Normal Clearance |
| Dynamic Load Rating | 153 kN |
| Inch/Metric | Metric |
| Radial Internal Clearance | Normal |
| Locking Device | No Locking Device |
| Lubricant | Oil Preservative |
| Static Load Rating [Max] | 35100 lbf |
| Precision Level | Standard (ABEC 1) |
| Origin | Single Row Angular Contact |
| Flush Ground | Yes |
| Width | 1.5 in, 38 mm |
| Limiting Speed - Oil | 3600 rpm |
| Bearing Type | Unmounted, Angular Contact |
| Inner Ring Width | 1.5 in, 38 mm |
| Snap Ring | No Snap Ring |
| Weight | 10.6 LB |
| EAN or UPC | 97741017039 |
