Find a Service Center
Alternate Products
MRC Bearing Service
8222
8000 Series PumPac® 40°/15° Angular Contact Ball Bearing Set
Item #100757230
- Single Row Angular Contact Bearing, 110 mm ID x 200 mm OD x 38 mm Wide, Open, Standard Precision (ABEC 1), Brass / Bronze Cage, Normal Clearance (C0), 40° Contact Angle, Duplex (2) Set
features
- MRC 7000-P Series bearings are similar in design to 7000 Series bearings, but the 7000-P Series bearings have features that give them a greatly increased thrust capacity. They are especially recommended for those applications where maximum thrust capacity
- This heavy-duty angular contact bearing series is designed with an optimum ball complement and race groove depth and have a 40° contact angle
- 7000-P bearings are restricted to applications involving primarily thrust loads. They should not be used where the bearing will be subjected to radial load exclusively, or combined radial and thrust load where the radial load is predominant.
- Furnished in one-piece machined bronze, phenolic composition or special material riding ground OD of inner ring.
- 7200-P Light Series bearing are available in bore sizes ranging from 10 mm to 200 mm. They are used with heavy one-directional thrust loads, or combined radial and thrust loads where the thrust load is predominant.
| No. in Set | Duplex Set |
| Width | 1.5 in, 38 mm |
| Preload Level | Light |
| Radial Internal Clearance | Normal |
| Contact Angle | 40 Degree |
| Internal Design | Universal Mounting |
| Rows of Balls | Single |
| Enclosure | Open |
| O.D. | 7.87 in, 200 mm |
| Snap Ring | No Snap Ring |
| Limiting Speed - Oil | 3600 rpm |
| Static Load Rating | 156 kN |
| I.D. | 4.33 in, 110 mm |
| Cage Type | Metal |
| Precision Level | Standard (ABEC 1) |
| Fillet Radius | 2 mm |
| Cage Material | Brass |
| Material | Bearing Steel |
| Origin | Single Row Angular Contact |
| Limiting Speed - Grease | 2600 rpm |
| icNumber | 7699063 |
| Bearing Type | Unmounted, Angular Contact |
| Radial Internal Clearance Specification | Normal Clearance |
| Bore Type | Cylindrical |
| O.D. Type | Cylindrical |
| Locking Device | No Locking Device |
| Inch/Metric | Metric |
| Precision | Standard |
| Flush Ground | Yes |
| Temperature Range [Max] | 450 °F |
| Inner Ring Width | 1.5 in, 38 mm |
| Capacity | Standard Capacity |
| Static Load Rating [Max] | 35100 lbf |
| Lubricant | Oil Preservative |
| Series | 7200P |
| Seal Material | None |
| Seal Type | Unsealed |
| Outer Ring Width | 1.5 in, 38 mm |
| Dynamic Load Rating | 153 kN |
| Ball Material | Steel |
| Weight | 10.6 LB |
| EAN or UPC | 97741017039 |
