Find a Service Center
Alternate Products
- Single Row Angular Contact Bearing, 65 mm ID x 140 mm OD x 66 mm Wide, Open, Standard Precision (ABEC 1), Brass / Bronze Cage, Normal Clearance (C0), 40° Contact Angle, Duplex (2) Set
features
- MRC 7000-P Series bearings are similar in design to 7000 Series bearings, but the 7000-P Series bearings have features that give them a greatly increased thrust capacity. They are especially recommended for those applications where maximum thrust capacity
- This heavy-duty angular contact bearing series is designed with an optimum ball complement and race groove depth and have a 40° contact angle
- 7000-P bearings are restricted to applications involving primarily thrust loads. They should not be used where the bearing will be subjected to radial load exclusively, or combined radial and thrust load where the radial load is predominant.
- Furnished in one-piece machined bronze, phenolic composition or special material riding ground OD of inner ring.
- 7300-P Medium Series bearings are available in bore sizes from 10mm o 200 mm. They can accommodate very heavy one-directional thrust loads, or combined radial and thrust loads where the thrust load is predominant.
| O.D. | 140 mm |
| Outer Ring Width | 66 mm |
| Fillet Radius | 2 mm |
| Inch/Metric | Metric Bore |
| Precision Level | Standard (ABEC 1) |
| Snap Ring | No Snap Ring |
| Enclosure | Open |
| Radial Internal Clearance Specification | Normal Clearance |
| Seal Type | Unsealed |
| Contact Angle | 40° |
| Static Load Rating | 80 kN |
| Cage Type | Metal |
| Width | 66.000 mm |
| Cage Material | Brass/Bronze |
| Capacity | Standard Capacity |
| Locking Device | No Locking Device |
| Rows of Balls | Single |
| I.D. | 65 mm |
| Flush Ground | Yes |
| Precision | Standard |
| Static Load Rating [Max] | 19400 lbf |
| Inner Ring Width | 66 mm |
| icNumber | 7697418 |
| Limiting Speed - Oil | 6000 rpm |
| Radial Internal Clearance | Normal |
| O.D. Type | Straight |
| Material | Steel |
| Seal Material | None |
| Dynamic Load Rating | 24300 lbf |
| Internal Design | Universal Mounting |
| Ball Material | Steel |
| Series | 7300P |
| Bearing Type | Angular Contact |
| Preload Level | None |
| Lubricant | Oil Preservative |
| Origin | Single Row Angular Contact |
| Limiting Speed - Grease | 4600 rpm |
| Temperature Range [Max] | 450 °F |
| Bore Type | Round Bore |
| No. in Set | Duplex Set |
| Weight | 5.628 LB |
| EAN or UPC | 97741017770 |
