Find a Service Center
Alternate Products
- Single Row Angular Contact Bearing, 65 mm ID x 140 mm OD x 66 mm Wide, Open, Standard Precision (ABEC 1), Brass / Bronze Cage, Normal Clearance (C0), 40° Contact Angle, Duplex (2) Set
features
- MRC 7000-P Series bearings are similar in design to 7000 Series bearings, but the 7000-P Series bearings have features that give them a greatly increased thrust capacity. They are especially recommended for those applications where maximum thrust capacity
- This heavy-duty angular contact bearing series is designed with an optimum ball complement and race groove depth and have a 40° contact angle
- 7000-P bearings are restricted to applications involving primarily thrust loads. They should not be used where the bearing will be subjected to radial load exclusively, or combined radial and thrust load where the radial load is predominant.
- Furnished in one-piece machined bronze, phenolic composition or special material riding ground OD of inner ring.
- 7300-P Medium Series bearings are available in bore sizes from 10mm o 200 mm. They can accommodate very heavy one-directional thrust loads, or combined radial and thrust loads where the thrust load is predominant.
| Lubricant | Oil Preservative |
| Ball Material | Steel |
| Radial Internal Clearance Specification | Normal Clearance |
| Seal Type | Unsealed |
| Static Load Rating [Max] | 19400 lbf |
| Width | 66.000 mm |
| Cage Type | Metal |
| Radial Internal Clearance | Normal |
| Rows of Balls | Single |
| icNumber | 7697418 |
| Bearing Type | Angular Contact |
| Locking Device | No Locking Device |
| Limiting Speed - Oil | 6000 rpm |
| I.D. | 65 mm |
| Outer Ring Width | 66 mm |
| Snap Ring | No Snap Ring |
| Limiting Speed - Grease | 4600 rpm |
| Internal Design | Universal Mounting |
| Preload Level | None |
| Precision | Standard |
| Contact Angle | 40° |
| Bore Type | Round Bore |
| Dynamic Load Rating | 24300 lbf |
| Flush Ground | Yes |
| Seal Material | None |
| Enclosure | Open |
| Inch/Metric | Metric Bore |
| Temperature Range [Max] | 450 °F |
| Origin | Single Row Angular Contact |
| Fillet Radius | 2 mm |
| Cage Material | Brass/Bronze |
| Static Load Rating | 80 kN |
| O.D. Type | Straight |
| Material | Steel |
| Precision Level | Standard (ABEC 1) |
| Series | 7300P |
| O.D. | 140 mm |
| No. in Set | Duplex Set |
| Capacity | Standard Capacity |
| Inner Ring Width | 66 mm |
| Weight | 5.628 LB |
| EAN or UPC | 97741017770 |
