Find a Service Center
Alternate Products
MRC Bearing Service
8317
8000 Series PumPac® 40°/15° Angular Contact Ball Bearing Set
Item #100760773
- Single Row Angular Contact Bearing, 85 mm ID x 180 mm OD x 41 mm Wide, Open, Standard Precision (ABEC 1), Brass / Bronze Cage, Normal Clearance (C0), 40° Contact Angle, Duplex (2) Set
features
- MRC 7000-P Series bearings are similar in design to 7000 Series bearings, but the 7000-P Series bearings have features that give them a greatly increased thrust capacity. They are especially recommended for those applications where maximum thrust capacity
- This heavy-duty angular contact bearing series is designed with an optimum ball complement and race groove depth and have a 40° contact angle
- 7000-P bearings are restricted to applications involving primarily thrust loads. They should not be used where the bearing will be subjected to radial load exclusively, or combined radial and thrust load where the radial load is predominant.
- Furnished in one-piece machined bronze, phenolic composition or special material riding ground OD of inner ring.
- 7300-P Medium Series bearings are available in bore sizes from 10mm o 200 mm. They can accommodate very heavy one-directional thrust loads, or combined radial and thrust loads where the thrust load is predominant.
| Precision Level | Standard (ABEC 1) |
| Cage Type | Metal |
| Precision | Standard |
| Temperature Range [Max] | 450 °F |
| Material | Bearing Steel |
| Snap Ring | No Snap Ring |
| Bearing Type | Unmounted, Angular Contact |
| Cage Material | Brass |
| Static Load Rating | 122 kN |
| Radial Internal Clearance | Normal |
| Lubricant | Oil Preservative |
| Origin | Single Row Angular Contact |
| Preload Level | Light |
| Fillet Radius | 2.5 mm |
| Inch/Metric | Metric |
| Inner Ring Width | 1.61 in, 41 mm |
| I.D. | 3.35 in, 85 mm |
| Dynamic Load Rating | 148 kN |
| Rows of Balls | Single |
| O.D. | 7.09 in, 180 mm |
| Outer Ring Width | 1.61 in, 41 mm |
| Internal Design | Universal Mounting |
| Limiting Speed - Grease | 3500 rpm |
| Width | 1.61 in, 41 mm |
| Bore Type | Cylindrical |
| Limiting Speed - Oil | 4500 rpm |
| Series | 7300P |
| Locking Device | No Locking Device |
| icNumber | 7699065 |
| Seal Material | None |
| Capacity | Standard Capacity |
| Flush Ground | Yes |
| No. in Set | Duplex Set |
| Static Load Rating [Max] | 32100 lbf |
| Ball Material | Steel |
| Seal Type | Unsealed |
| Contact Angle | 40 Degree |
| Radial Internal Clearance Specification | Normal Clearance |
| O.D. Type | Cylindrical |
| Enclosure | Open |
| Weight | 11.222 LB |
| EAN or UPC | 97741018029 |
