Find a Service Center
Alternate Products
MRC Bearing Service
8317
8000 Series PumPac® 40°/15° Angular Contact Ball Bearing Set
Item #100760773
- Single Row Angular Contact Bearing, 85 mm ID x 180 mm OD x 41 mm Wide, Open, Standard Precision (ABEC 1), Brass / Bronze Cage, Normal Clearance (C0), 40° Contact Angle, Duplex (2) Set
features
- MRC 7000-P Series bearings are similar in design to 7000 Series bearings, but the 7000-P Series bearings have features that give them a greatly increased thrust capacity. They are especially recommended for those applications where maximum thrust capacity
- This heavy-duty angular contact bearing series is designed with an optimum ball complement and race groove depth and have a 40° contact angle
- 7000-P bearings are restricted to applications involving primarily thrust loads. They should not be used where the bearing will be subjected to radial load exclusively, or combined radial and thrust load where the radial load is predominant.
- Furnished in one-piece machined bronze, phenolic composition or special material riding ground OD of inner ring.
- 7300-P Medium Series bearings are available in bore sizes from 10mm o 200 mm. They can accommodate very heavy one-directional thrust loads, or combined radial and thrust loads where the thrust load is predominant.
| Radial Internal Clearance Specification | Normal Clearance |
| Seal Material | None |
| Limiting Speed - Oil | 4500 rpm |
| I.D. | 3.35 in, 85 mm |
| Lubricant | Oil Preservative |
| Locking Device | No Locking Device |
| Origin | Single Row Angular Contact |
| Enclosure | Open |
| Outer Ring Width | 1.61 in, 41 mm |
| Cage Material | Brass |
| Inner Ring Width | 1.61 in, 41 mm |
| Precision | Standard |
| Static Load Rating [Max] | 32100 lbf |
| Temperature Range [Max] | 450 °F |
| Width | 1.61 in, 41 mm |
| Fillet Radius | 2.5 mm |
| Limiting Speed - Grease | 3500 rpm |
| O.D. Type | Cylindrical |
| Capacity | Standard Capacity |
| Internal Design | Universal Mounting |
| Precision Level | Standard (ABEC 1) |
| Inch/Metric | Metric |
| Flush Ground | Yes |
| Preload Level | Light |
| Ball Material | Steel |
| Radial Internal Clearance | Normal |
| O.D. | 7.09 in, 180 mm |
| No. in Set | Duplex Set |
| Seal Type | Unsealed |
| Bore Type | Cylindrical |
| Rows of Balls | Single |
| Bearing Type | Unmounted, Angular Contact |
| Material | Bearing Steel |
| Cage Type | Metal |
| Contact Angle | 40 Degree |
| Static Load Rating | 122 kN |
| Series | 7300P |
| Dynamic Load Rating | 148 kN |
| Snap Ring | No Snap Ring |
| icNumber | 7699065 |
| Weight | 11.222 LB |
| EAN or UPC | 97741018029 |
