- Single Row Angular Contact Bearing, 65 mm ID x 160 mm OD x 37 mm Wide, Open, Standard Precision (ABEC 1), Brass / Bronze Cage, Normal Clearance (C0), 40° Contact Angle
features
- MRC angular contact bearings with a PJ suffix have one heavy race shoulder on the outer ring, opposing one heavy race shoulder and on recessed race shoulder on the inner ring. Because of this construction, it is possible for this bearing to incorporate a
- 7000-PJ bearings are particularly suitable for positions where the thrust is always present in one direction. It should not be used where the bearing is subjected to radial load only, or combined radial and thrust load where the radial load is predominant
- 7000-PJ bearings are available with either peressed brass or machined brass, ball centered cages. The low shoulder diameters on the nonthrust sides of inner and outer rings, combined with large clearances between the land diameters and the cage, allow fo
- ABEC Grade 3 bore tolerances reduce the range of interference fits between the shaft and bearing bore. These tighter tolerances result in closer control of preload and minimize the risk of thermal runaway.
- 7400-PJ and PJD Series bearings are similar to the 7200-PJ and 7300-PH Series but are heavier sectioned and are used for very heavy thrust loads or combined radial and thrust loads where thrust is predominant.
| Static Load Rating [Max] | 23800 lbf |
| Origin | Single Row Angular Contact |
| Static Load Rating | 96.5 kN |
| Capacity | Standard Capacity |
| Seal Material | None |
| Preload Level | Light |
| Flush Ground | Yes |
| Snap Ring | No Snap Ring |
| Precision Level | Standard (ABEC 1) |
| Bore Type | Cylindrical |
| Rows of Balls | Single |
| Dynamic Load Rating | 130 kN |
| Cage Type | Metal |
| Precision | Standard |
| O.D. | 6.3 in, 160 mm |
| Width | 1.46 in, 37 mm |
| Cage Material | Brass |
| Inch/Metric | Metric |
| Material | Bearing Steel |
| I.D. | 2.56 in, 65 mm |
| Ball Material | Steel |
| Bearing Type | Unmounted, Angular Contact |
| Outer Ring Width | 1.46 in, 37 mm |
| Lubricant | Oil Preservative |
| Series | 7400PJ |
| Seal Type | Unsealed |
| Limiting Speed - Grease | 3800 rpm |
| Internal Design | Universal Mounting |
| icNumber | 7695861 |
| Radial Internal Clearance | Normal |
| Fillet Radius | 2 mm |
| Contact Angle | 40 Degree |
| Inner Ring Width | 1.46 in, 37 mm |
| Enclosure | Open |
| Temperature Range [Max] | 450 °F |
| Locking Device | No Locking Device |
| O.D. Type | Cylindrical |
| Limiting Speed - Oil | 4900 rpm |
| Radial Internal Clearance Specification | Normal Clearance |
| No. in Set | Single Bearing |
| Weight | 8.636 LB |
| EAN or UPC | 97741018524 |

