Find a Service Center
- Radial Shaft Seal
- 438.15 mm Shaft Diameter
- 476.45 mm Housing Bore Diameter
- 19.05 mm Width
description
- Metal clad seal has single spring-loaded sealing element with Duralip (was leather) exclusion element. Used where there is insufficient room for two seals. HDSA and HDSBare used to retain lubricants and exclude dirt in applications not wide enough to hold two seals.
| Lip Material | Duralip (Carboxylated Nitrile) |
| Cover/Compensation Ring/Plate Required | No |
| Spring Material | Carbon Steel Garter |
| Seal Application | General Purpose |
| Temperature Range [Min] | -40 °F |
| Misalignment & Runout (In. @ Feet Per Minute) | 0.062 Max |
| Seal Design | Molded Design |
| Housing Bore Dia. | 476.45 mm |
| Surface Speed [Nom] | 5,000 ft/min |
| Temp Description | w/4 Adjustable Lugs |
| Shaft Dia. | 438.15 mm |
| Lip Type | Single Lip w/Spring |
| Construction | HDS3 |
| Temperature Range [Max] | 250 °F |
| Pressure | 15 psi |
| Inch/Metric | Metric |
| Case Construction | Steel Case w/Inner Case |
| Lip Style | Internal |
| Weight | 3.499 LB |
| EAN or UPC | 85311129787 |
