Find a Service Center
- Radial Shaft Seal
- 438.15 mm Shaft Diameter
- 476.45 mm Housing Bore Diameter
- 19.05 mm Width
description
- Metal clad seal has single spring-loaded sealing element with Duralip (was leather) exclusion element. Used where there is insufficient room for two seals. HDSA and HDSBare used to retain lubricants and exclude dirt in applications not wide enough to hold two seals.
| Temp Description | w/4 Adjustable Lugs |
| Seal Application | General Purpose |
| Inch/Metric | Metric |
| Pressure | 15 psi |
| Shaft Dia. | 438.15 mm |
| Lip Material | Duralip (Carboxylated Nitrile) |
| Housing Bore Dia. | 476.45 mm |
| Construction | HDS3 |
| Spring Material | Carbon Steel Garter |
| Misalignment & Runout (In. @ Feet Per Minute) | 0.062 Max |
| Lip Style | Internal |
| Case Construction | Steel Case w/Inner Case |
| Temperature Range [Max] | 250 °F |
| Seal Design | Molded Design |
| Cover/Compensation Ring/Plate Required | No |
| Temperature Range [Min] | -40 °F |
| Surface Speed [Nom] | 5,000 ft/min |
| Lip Type | Single Lip w/Spring |
| Weight | 3.499 LB |
| EAN or UPC | 85311129787 |
