
- Radial Shaft Seal
- 584.2 mm Shaft Diameter
- 635 mm Housing Bore Diameter
- 25.4 mm Width
description
- Metal clad seal has single spring-loaded sealing element with Duralip (was leather) exclusion element. Used where there is insufficient room for two seals. HDSA and HDSBare used to retain lubricants and exclude dirt in applications not wide enough to hold two seals.
Construction | HDS1 |
Lip Style | Internal |
Inch/Metric | Metric |
Housing Bore Dia. | 635 mm |
Seal Application | General Purpose |
Cover/Compensation Ring/Plate Required | No |
Lip Type | Non-Split |
Temperature Range [Min] | -40 °F |
Misalignment & Runout (In. @ Feet Per Minute) | 0.062 Max |
Shaft Dia. | 584.2 mm |
Case Construction | Steel Case w/Inner Case |
Pressure | 10 psi |
Spring Material | Carbon Steel Garter |
Lip Material | Nitrile |
Temperature Range [Max] | 250 °F |
Seal Design | Bonded Design |
Weight | 10.901 LB |
EAN or UPC | 85311137713 |
