Find a Service Center
- Radial Shaft Seal
- 660.4 mm Shaft Diameter
- 701.675 mm Housing Bore Diameter
- 19.05 mm Width
description
- Metal clad seal has single spring-loaded sealing element with Duralip (was leather) exclusion element. Used where there is insufficient room for two seals. HDSA and HDSBare used to retain lubricants and exclude dirt in applications not wide enough to hold two seals.
| Temperature Range [Max] | 400 °F |
| Seal Design | Assembled Design |
| Housing Bore Dia. | 701.675 mm |
| Case Construction | Steel Case w/Inner Case |
| Temperature Range [Min] | -40 °F |
| Misalignment & Runout (In. @ Feet Per Minute) | 0.062, 0.093 |
| Shaft Dia. | 660.4 mm |
| Cover/Compensation Ring/Plate Required | No |
| Seal Application | General Purpose |
| Inch/Metric | Metric |
| Lip Style | Internal |
| Lip Type | Single Lip w/Spring |
| Spring Material | Stainless Steel |
| Lip Material | Fluoroelastomer - Viton |
| Construction | HDS2 |
| Pressure | 15 psi |
| Weight | 11.869 LB |
| EAN or UPC | 85311184007 |
