Find a Service Center
- Radial Shaft Seal
- 940 mm Shaft Diameter
- 1000 mm Housing Bore Diameter
- 25 mm Width
description
- Metal clad seal has single spring-loaded sealing element with Duralip (was leather) exclusion element. Used where there is insufficient room for two seals. HDSA and HDSBare used to retain lubricants and exclude dirt in applications not wide enough to hold two seals.
| Lip Type | Non-Split |
| Lip Style | Internal |
| Inch/Metric | Metric |
| Surface Speed [Nom] | 5,000 ft/min |
| Pressure | 10 psi |
| Temperature Range [Min] | -40 °F |
| Misalignment & Runout (In. @ Feet Per Minute) | 0.062 Max |
| Temperature Range [Max] | 250 °F |
| Seal Application | General Purpose |
| Cover/Compensation Ring/Plate Required | No |
| Seal Design | Bonded Design |
| Spring Material | Carbon Steel Garter |
| Construction | HDS1 |
| Shaft Dia. | 940 mm |
| Lip Material | Duralip (Carboxylated Nitrile) |
| Housing Bore Dia. | 1000 mm |
| Case Construction | Steel Case w/Inner Case |
| Weight | 19.924 LB |
| EAN or UPC | 85311902403 |
