Find a Service Center
Alternate Products
- Cam Follower
- 4" OD Flanged Roller
- 1 1/4" Standard Stud
- 1 1/4-12 Thread
- Metal Plug End
description
- SMITH-TRAX® were designed for applications with a combination of both radial and axial loads. The SMITH-TRAX® bearings use tapered roller bearings or deep groove ball bearings to handle this combination of radial and thrust loads. This bearing system is considerably more effective at supporting axial loads than needle rollers found in standard cam followers. Special seals provide for use in contaminated environments. A metal expansion plug closes off the back end of the bearing to allow for a large lubrication reservoir.
| Inch/Metric | Inch |
| Flange Thickness | 0.59375 in |
| Roller Width | 2 in |
| Stud Length | 2.75 in |
| Stud Type | Standard |
| End Type | Metal Plug |
| Stud Dia. | 1.25 in |
| Bearing Type | Tapered Roller Bearing |
| Thread Type | UNF |
| Threads per Inch | 12 |
| Static Capacity | 16000 lbf |
| Roller Dia. | 4 in |
| Dynamic Load Rating | 14300 lbf |
| Roller Type | Flanged |
| Thread Size | 1 1/4 |
| Material | Steel |
| Enclosure | Sealed |
| Dynamic Thrust Load Rating | 5790 lbf |
| Weight | 7.9 LB |
| EAN or UPC | 651041149304 |
