Find a Service Center
Alternate Products
- Cam Follower
- 4" OD Flanged Roller
- 1 1/4" Standard Stud
- 1 1/4-12 Thread
- Metal Plug End
description
- SMITH-TRAX® were designed for applications with a combination of both radial and axial loads. The SMITH-TRAX® bearings use tapered roller bearings or deep groove ball bearings to handle this combination of radial and thrust loads. This bearing system is considerably more effective at supporting axial loads than needle rollers found in standard cam followers. Special seals provide for use in contaminated environments. A metal expansion plug closes off the back end of the bearing to allow for a large lubrication reservoir.
| Stud Type | Standard |
| Roller Type | Flanged |
| Stud Dia. | 1.25 in |
| End Type | Metal Plug |
| Stud Length | 2.75 in |
| Roller Dia. | 4 in |
| Inch/Metric | Inch |
| Thread Size | 1 1/4 |
| Material | Steel |
| Flange Thickness | 0.59375 in |
| Roller Width | 2 in |
| Thread Type | UNF |
| Dynamic Load Rating | 14300 lbf |
| Dynamic Thrust Load Rating | 5790 lbf |
| Bearing Type | Tapered Roller Bearing |
| Static Capacity | 16000 lbf |
| Enclosure | Sealed |
| Threads per Inch | 12 |
| Weight | 7.9 LB |
| EAN or UPC | 651041149304 |
