- Single Row Radial Bearing, 0.5625" ID x 0.394" OD x 0.511811" Wide, Hex Bore, Double Sealed (Contact), Standard Precision (ABEC 1), Steel Cage, Greater Than Normal Clearance (C3)
description
- This series is designed to be used either for outer or inner ring rotation in low speed, moderatly loaded applications, primarily in agricultural implements and conveyors. The main advantage of these bearings is ease of mounting
- except for end-wise positioning by adjacent parts, no collars, setscrews or other locking devices are required to lock the inner ring to the hex shaft. The tolerances of the hex bore in this series are suitable for mounting on cold rolled hex shafting. These bearings utilize the R type shroud seal.
applications
- General industrial
- Automotive
- Agricultural
- Chemical
- Utilities
| Radial Internal Clearance Specification | Greater Than Normal Clearance |
| Temperature Range [Min] | -30 °F |
| Lubricant | Polyurea Base |
| Radial Internal Clearance | C3 |
| Material | Steel |
| Cage Material | Steel |
| Rows of Balls | Single |
| Seal Type | Contact Seals |
| Contact Angle | 0° |
| Ball Material | Steel |
| icNumber | 7700814 |
| Cage Type | Metal |
| Dynamic Load Rating | 2360 lbf |
| I.D. | 9/16 in |
| Precision | Standard |
| Static Load Rating [Max] | 1000 lbf |
| Seal Material | Rubber |
| No. in Set | Single Bearing |
| Capacity | Standard Capacity |
| Locking Device | No Locking Device |
| Bore Type | Hex Bore |
| Temperature Range [Max] | 275 °F |
| Inch/Metric | Inch Bore |
| O.D. Type | Straight |
| O.D. | 1.37795 in |
| Snap Ring | No Snap Ring |
| Preload Level | None |
| Origin | Single Row Radial |
| Enclosure | Double Sealed |
| Outer Ring Width | 11 mm |
| Bearing Type | Radial |
| Inner Ring Width | 13 mm |
| Precision Level | Standard (ABEC 1) |
| Weight | 0.25 LB |
| EAN or UPC | 87796083363 |

