Find a Service Center
- Single Row Radial Bearing, 0.875" ID x 2.04724" OD x 1" Wide, Hex Bore, Double Sealed (Contact), Standard Precision (ABEC 1), Steel Cage, Greater Than Normal Clearance (C3)
description
- This series is designed to be used either for outer or inner ring rotation in low speed, moderatly loaded applications, primarily in agricultural implements and conveyors. The main advantage of these bearings is ease of mounting
- except for end-wise positioning by adjacent parts, no collars, setscrews or other locking devices are required to lock the inner ring to the hex shaft. The tolerances of the hex bore in this series are suitable for mounting on cold rolled hex shafting. These bearings utilize the R type shroud seal.
| Precision | Standard |
| O.D. | 2.04724 in |
| Radial Internal Clearance Specification | Greater Than Normal Clearance |
| No. of Balls | 9 |
| Bore Type | Hex Bore |
| Temperature Range [Max] | 275 °F |
| Lubricant | Polyurea Base |
| Enclosure | Double Sealed |
| Origin | Wide Inner Ring |
| Dynamic Load Rating | 3450 lbf |
| Ball Dia. | 0.313 in |
| Precision Level | Standard (ABEC 1) |
| Capacity | Standard Capacity |
| Outer Ring Width | 0.591 in |
| O.D. Type | Straight |
| I.D. | 7/8 in |
| Temperature Range [Min] | -30 °F |
| Locking Device | No Locking Device |
| Inch/Metric | Inch Bore |
| No. in Set | Single Bearing |
| Material | Steel |
| Inner Ring Width | 1 in |
| Contact Angle | 0° |
| Seal Type | Contact Seals |
| Cage Type | Metal |
| Ball Material | Steel |
| Cage Material | Steel |
| Static Load Rating [Max] | 1560 lbf |
| Rows of Balls | Single |
| Seal Material | Rubber |
| Preload Level | None |
| Snap Ring | No Snap Ring |
| Bearing Type | Radial |
| Radial Internal Clearance | C3 |
| Weight | 0.41 LB |
| EAN or UPC | 87796045965 |
