Find a Service Center
- Wide Inner Ring Bearing, 1" ID x 2.44094" OD x 0.945" Wide, Hex Bore, Double Sealed (Contact), Standard Precision (ABEC 1), Steel Cage, Greater Than Normal Clearance (C3)
description
- This series is designed to be used either for outer or inner ring rotation in low speed, moderatly loaded applications, primarily in agricultural implements and conveyors. The main advantage of these bearings is ease of mounting
- except for end-wise positioning by adjacent parts, no collars, setscrews or other locking devices are required to lock the inner ring to the hex shaft. The tolerances of the hex bore in this series are suitable for mounting on cold rolled hex shafting. These bearings utilize the R type shroud seal.
| Cage Material | Steel |
| Lubricant | Polyurea Base |
| Bearing Type | Radial |
| Radial Internal Clearance Specification | Greater Than Normal Clearance |
| Enclosure | Double Sealed |
| I.D. | 1 in |
| Ball Dia. | 3/8 in |
| Seal Type | Contact Seals |
| Radial Internal Clearance | C3 |
| Precision | Standard |
| Snap Ring | No Snap Ring |
| Dynamic Load Rating | 4800 lbf |
| Origin | Wide Inner Ring |
| Locking Device | No Locking Device |
| O.D. | 2.44094 in |
| Outer Ring Width | 16 mm |
| Fillet Radius | 0.039 in |
| Material | Steel |
| Precision Level | Standard (ABEC 1) |
| Seal Material | Rubber |
| No. of Balls | 9 |
| O.D. Type | Straight |
| Preload Level | None |
| No. in Set | Single Bearing |
| Inch/Metric | Inch Bore |
| Static Load Rating [Max] | 2280 lbf |
| icNumber | 7701286 |
| Bore Type | Hex Bore |
| Capacity | Standard Capacity |
| Ball Material | Steel |
| Rows of Balls | Single |
| Cage Type | Metal |
| Temperature Range [Max] | 275 °F |
| Temperature Range [Min] | -30 °F |
| Inner Ring Width | 0.945 in |
| Contact Angle | 0° |
| Weight | 0.67 LB |
| EAN or UPC | 87796040625 |
