Find a Service Center
- Single Row Angular Contact Bearing, 25 mm ID x 80 mm OD x 21 mm Wide, Open, Standard Precision (ABEC 1), Steel Cage, Greater Than Normal Clearance (C3), 20° Contact Angle
description
- The angular contact Heavy 7400 series is dimensionally interchangeable with the radial 400 series.Those sizes with a "WN" suffix include a refined bore diameter tolerance. The 7400 series can sustain heavier thrust and combined loads than the 7300WN series. A single bearing is recommended for applications in which the thrust load is in one direciton or, in the case of combined loads, the thrust load is high in relation to the radial load.A duplex pair is recommended for application where thrust is present in both dirctions or where axial displacement of the shaft must be restricted.For exceptionally high thrust loads in one direction, a tandem pair can be utilized opposed by a third bearing. Those sizes with a suffix "W" have a 20° contact angle and a steel retainer.Those sizes with a suffix "PW" have a 35° contact angle and a a steel retainer.Those sizes with a "WN" suffix have a 40° contact angle and a one-piece, high-strength macined bronzed cage.
applications
- General industrial
- Agricultural
- Chemical
- Utilities
| Preload Level | None |
| Dynamic Load Rating | 12000 lbf |
| Radial Internal Clearance Specification | Greater Than Normal Clearance |
| Lubricant | Oil Preservative |
| Inner Ring Width | 21 mm |
| O.D. Type | Straight |
| O.D. | 80 mm |
| Rows of Balls | Single |
| No. in Set | Single Bearing |
| icNumber | 7696686 |
| Capacity | Standard Capacity |
| Cage Material | Steel |
| Inch/Metric | Metric Bore |
| Static Load Rating [Max] | 5850 lbf |
| Snap Ring | No Snap Ring |
| Ball Material | Steel |
| Bore Type | Round Bore |
| Seal Material | None |
| Material | Steel |
| Outer Ring Width | 21 mm |
| Radial Internal Clearance | C3 |
| Origin | Single Row Angular Contact |
| Enclosure | Open |
| Locking Device | No Locking Device |
| Bearing Type | Angular Contact |
| Seal Type | Unsealed |
| I.D. | 25 mm |
| Precision | Standard |
| Precision Level | Standard (ABEC 1) |
| Internal Design | Universal Mounting |
| Cage Type | Metal |
| Fillet Radius | 0.06 in |
| Contact Angle | 20° |
| Weight | 1.389 LB |
| EAN or UPC | 87796046955 |
