Find a Service Center
- Single Row Radial Bearing (Stainless), 0.375" ID x 0.875" OD x 0.21875" Wide, Open, Standard Precision (ABEC 1), Steel Cage, Greater Than Normal Clearance (C3)
description
- Extra small, 30 Metric series ball bearings can sustain radial, thrust and combined loads proportionate to the capacities of the small shafts for which they are designed. They are especially suitable for use in fractional horsepower motors, domestic appliances, precision instruments, tape recorders and similar devices. These bearings are electric motor quality for applications where extra quietness is a requirement. Some sizes in this series are available in stainless steel.When ordering, these are denoted by a prefix A before the bearing number. (e.g.: A38K)
applications
- General industrial
- Automotive
- Agricultural
- Chemical
- Utilities
| Seal Type | Unsealed |
| Enclosure | Open |
| Rows of Balls | Single |
| Fillet Radius | 0.016 in |
| Lubricant | Oil Preservative |
| Static Load Rating [Max] | 312 lbf |
| Ball Material | Steel |
| Cage Material | Steel |
| Precision Level | Standard (ABEC 1) |
| Bearing Type | Radial |
| O.D. | 0.875 in |
| Dynamic Load Rating | 830 lbf |
| Origin | Single Row Radial |
| icNumber | 7703304 |
| Width | 7/32 in |
| Bore Type | Round Bore |
| Inner Ring Width | 0.2188 in |
| I.D. | 3/8 in |
| Seal Material | None |
| No. in Set | Single Bearing |
| Outer Ring Width | 7/32 in |
| Capacity | Standard Capacity |
| Snap Ring | No Snap Ring |
| O.D. Type | Straight |
| Contact Angle | 0° |
| Preload Level | None |
| Radial Internal Clearance | C3 |
| Pre Lubricant | None |
| Locking Device | No Locking Device |
| Precision | Standard |
| Inch/Metric | Inch Bore |
| Radial Internal Clearance Specification | Greater Than Normal Clearance |
| Material | Stainless Steel |
| Cage Type | Metal |
| Weight | 0.17 LB |
| EAN or UPC | 87796044197 |
| NSN Number | 3110-00-227-2544 |
