Find a Service Center
- 2.4375" Shaft, 4.125" Base to Center, Labyrinth Seals, Eccentric Collar, Non-Expansion Type
description
- Fafnir RSAO and LSAO type pillow blocks are equipped with GN-KRRB wide inner ring ball bearings, and the LSA series is equipped with GN-KLLB wide inner ring bearings. They are ideally suited for installations where the load is heavy inproportion to the shaft diameter or where considerable shock loads exist. These pillow blocks are prelubricated and ready for immediate use. For wet or extremely dirty conditions, a grease fitting is provided for relubrication if required. All units are supplied with a self-locking collar.
applications
- Agriculture
- Fans and blowers
- Food processing
- Conveyors
| Base Width | 4 in |
| Bearing Type | Ball Bearing |
| Housing Height | 7 1/32 in |
| Pillow Block Type | Thru-Bolt |
| Base Length | 13 3/4 in |
| Housing Construction | 1 Piece |
| Overall Width | 4 in |
| Length Through Bore | 3.125 in |
| Bolt Holes | 2 |
| Housing Width | 6 7/16 in |
| Mounted Unit Duty | Heavy-Duty |
| Bolt Size | 3/4 in |
| Series | LSAO Series |
| Collar No. | SN207K |
| Collar O.D. | 3 1/2 in |
| Shaft Dia. | 2.4375 in |
| Temperature Range [Max] | 350 °F |
| Bolt Hole Spacing | 11 1/4 in |
| Locking Device | Eccentric Locking Collar |
| Inch/Metric | Inch |
| End Type | Open End |
| Bolt Hole Width | 1 3/8 in |
| Insert Type | Steel Insert |
| Lubrication | Relubricatable |
| Bolt Hole Length | 7/8 in |
| Seal Type | Labyrinth Seals |
| Base Height | 1 1/2 in |
| Bearing Insert | GN207KRRB |
| Housing Material | Cast Iron |
| Bearing Design | Non-Expansion |
| Weight | 28.508 LB |
| EAN or UPC | 87796061569 |
