Find a Service Center
- 2.4375" Shaft, 4.125" Base to Center, Labyrinth Seals, Eccentric Collar, Non-Expansion Type
description
- Fafnir RSAO and LSAO type pillow blocks are equipped with GN-KRRB wide inner ring ball bearings, and the LSA series is equipped with GN-KLLB wide inner ring bearings. They are ideally suited for installations where the load is heavy inproportion to the shaft diameter or where considerable shock loads exist. These pillow blocks are prelubricated and ready for immediate use. For wet or extremely dirty conditions, a grease fitting is provided for relubrication if required. All units are supplied with a self-locking collar.
applications
- Agriculture
- Fans and blowers
- Food processing
- Conveyors
| Housing Material | Cast Iron |
| Seal Type | Labyrinth Seals |
| Bearing Type | Ball Bearing |
| Bearing Design | Non-Expansion |
| Base Length | 13 3/4 in |
| Lubrication | Relubricatable |
| Temperature Range [Max] | 350 °F |
| Housing Construction | 1 Piece |
| Bolt Hole Width | 1 3/8 in |
| Bolt Hole Spacing | 11 1/4 in |
| Series | LSAO Series |
| End Type | Open End |
| Inch/Metric | Inch |
| Housing Height | 7 1/32 in |
| Length Through Bore | 3.125 in |
| Overall Width | 4 in |
| Pillow Block Type | Thru-Bolt |
| Bolt Size | 3/4 in |
| Insert Type | Steel Insert |
| Bolt Holes | 2 |
| Shaft Dia. | 2.4375 in |
| Bolt Hole Length | 7/8 in |
| Base Height | 1 1/2 in |
| Collar O.D. | 3 1/2 in |
| Mounted Unit Duty | Heavy-Duty |
| Collar No. | SN207K |
| Housing Width | 6 7/16 in |
| Locking Device | Eccentric Locking Collar |
| Bearing Insert | GN207KRRB |
| Base Width | 4 in |
| Weight | 28.508 LB |
| EAN or UPC | 87796061569 |
