Find a Service Center
- 1.5" Shaft, 1.9375" Base to Center, Contact Seals, Eccentric Collar, Non-Expansion Type
description
- Created to handle stringent food handling requirements and serve in highly corrosive applications. All assembly components have been carefully selected to comply with all applicable federal food processing requirements without compromising bearing performance needs. These units are dimensionally stable under load and can operate in continuous temperatures up to 250 °F (brief exposure up to 350 °F).The finish will not scrape or flake off during use.
applications
- Food and beverage
- Material handling
- Dairy and refrigeration
- HVAC
- Chemical industry
- Maritime industry
- Highly corrosive environments
compliances
- 0
| Length Through Bore | 1.6875 in |
| Outer Ring Size | 208 |
| Housing Construction | 1 Piece |
| Bearing Type | Ball Bearing |
| Bolt Hole Width | 9/16 in |
| Shaft Dia. | 1.5 in |
| Base Length | 7 1/16 in |
| Overall Width | 2 5/16 in |
| Bolt Hole Length | 1 1/32 in |
| Base Width | 1 7/8 in |
| Pillow Block Type | Thru-Bolt |
| Seal Type | Contact Seals |
| Bolt Holes | 2 |
| Base Height | 3/4 in |
| Dynamic Load Rating | 8150 lbf |
| Locking Device | Eccentric Locking Collar |
| Collar O.D. | 2 3/8 in |
| Bolt Hole Spacing | 5 3/8 in |
| Static Load Rating [Max] | 4400 lbf |
| Bolt | 1/2 in |
| End Type | Open End |
| Series | RAK Series |
| Bearing Design | Non-Expansion |
| Housing Material | Polymer |
| Collar No. | S1108KT |
| Inch/Metric | Inch |
| Bearing Insert | G1108KRRB TDCF |
| Housing Height | 3 15/16 in |
| Mounted Unit Duty | Normal-Duty, Corrosion Resistant-Duty |
| Lubrication | Relubricatable |
| Temperature Range [Max] | 250 °F |
| Weight | 2.666 LB |
| EAN or UPC | 87796180116 |
-
![HACCP Friendly]()
HACCP Friendly
