- 1.5" Shaft, 1.9375" Base to Center, Contact Seals, Eccentric Collar, Non-Expansion Type
description
- Created to handle stringent food handling requirements and serve in highly corrosive applications. All assembly components have been carefully selected to comply with all applicable federal food processing requirements without compromising bearing performance needs. These units are dimensionally stable under load and can operate in continuous temperatures up to 250 °F (brief exposure up to 350 °F).The finish will not scrape or flake off during use.
applications
- Food and beverage
- Material handling
- Dairy and refrigeration
- HVAC
- Chemical industry
- Maritime industry
- Highly corrosive environments
compliances
- 0
| Bearing Design | Non-Expansion |
| Shaft Dia. | 1.5 in |
| Seal Type | Contact Seals |
| Bolt Holes | 2 |
| Housing Construction | 1 Piece |
| Static Load Rating [Max] | 4400 lbf |
| Outer Ring Size | 208 |
| Collar O.D. | 2 3/8 in |
| Housing Material | Polymer |
| Inch/Metric | Inch |
| Collar No. | S1108KT |
| Series | RAK Series |
| Lubrication | Relubricatable |
| Bolt Hole Width | 9/16 in |
| Dynamic Load Rating | 8150 lbf |
| Bearing Insert | G1108KRRB TDCF |
| Temperature Range [Max] | 250 °F |
| Locking Device | Eccentric Locking Collar |
| Bearing Type | Ball Bearing |
| Base Width | 1 7/8 in |
| Mounted Unit Duty | Normal-Duty, Corrosion Resistant-Duty |
| End Type | Open End |
| Bolt | 1/2 in |
| Length Through Bore | 1.6875 in |
| Bolt Hole Spacing | 5 3/8 in |
| Base Length | 7 1/16 in |
| Bolt Hole Length | 1 1/32 in |
| Base Height | 3/4 in |
| Overall Width | 2 5/16 in |
| Pillow Block Type | Thru-Bolt |
| Housing Height | 3 15/16 in |
| Weight | 2.666 LB |
| EAN or UPC | 87796180116 |
-
HACCP Friendly


