Find a Service Center
- 1.1875" Shaft, 1.5625" Base to Center, Contact Seals, Eccentric Collar, Non-Expansion Type
description
- Created to handle stringent food handling requirements and serve in highly corrosive applications. All assembly components have been carefully selected to comply with all applicable federal food processing requirements without compromising bearing performance needs. These units are dimensionally stable under load and can operate in continuous temperatures up to 250 °F (brief exposure up to 350 °F).The finish will not scrape or flake off during use.
applications
- Food and beverage
- HVAC
- Chemical industry
- Maritime industry
- Highly corrosive environments
- Material handling
- Dairy and refrigeration
compliances
- 0
| Bolt Holes | 2 |
| Temperature Range [Max] | 250 °F |
| Inch/Metric | Inch |
| Dynamic Load Rating | 4900 lbf |
| Bearing Insert | G1103KRRB TDCF |
| Locking Device | Eccentric Locking Collar |
| End Type | Open End |
| Base Height | 17/32 in |
| Collar O.D. | 1 47/64 in |
| Bolt Hole Length | 15/16 in |
| Pillow Block Type | Thru-Bolt |
| Length Through Bore | 1.4375 in |
| Shaft Dia. | 1.1875 in |
| Base Width | 1 9/16 in |
| Overall Width | 1 31/32 in |
| Base Length | 6 3/16 in |
| Bolt Hole Spacing | 4 5/8 in |
| Lubrication | Relubricatable |
| Seal Type | Contact Seals |
| Housing Material | Polymer |
| Housing Construction | 1 Piece |
| Bolt | 1/2 in |
| Housing Height | 3 5/32 in |
| Bearing Type | Ball Bearing |
| Outer Ring Size | 206 |
| Mounted Unit Duty | Normal-Duty, Corrosion Resistant-Duty |
| Bearing Design | Non-Expansion |
| Static Load Rating [Max] | 2500 lbf |
| Bolt Hole Width | 9/16 in |
| Series | RAK Series |
| Collar No. | S1103K |
| Weight | 1.19 LB |
| EAN or UPC | 87796180062 |
-
![HACCP Friendly]()
HACCP Friendly
