Find a Service Center
- 1.1875" Shaft, 1.5625" Base to Center, Contact Seals, Eccentric Collar, Non-Expansion Type
description
- Created to handle stringent food handling requirements and serve in highly corrosive applications. All assembly components have been carefully selected to comply with all applicable federal food processing requirements without compromising bearing performance needs. These units are dimensionally stable under load and can operate in continuous temperatures up to 250 °F (brief exposure up to 350 °F).The finish will not scrape or flake off during use.
applications
- Food and beverage
- HVAC
- Chemical industry
- Maritime industry
- Highly corrosive environments
- Material handling
- Dairy and refrigeration
compliances
- 0
| Bolt Hole Width | 9/16 in |
| Bearing Design | Non-Expansion |
| Mounted Unit Duty | Normal-Duty, Corrosion Resistant-Duty |
| Base Length | 6 3/16 in |
| Housing Height | 3 5/32 in |
| Housing Construction | 1 Piece |
| Collar O.D. | 1 47/64 in |
| Base Height | 17/32 in |
| Bolt Hole Length | 15/16 in |
| Series | RAK Series |
| Dynamic Load Rating | 4900 lbf |
| End Type | Open End |
| Housing Material | Polymer |
| Static Load Rating [Max] | 2500 lbf |
| Base Width | 1 9/16 in |
| Length Through Bore | 1.4375 in |
| Collar No. | S1103K |
| Seal Type | Contact Seals |
| Bolt | 1/2 in |
| Overall Width | 1 31/32 in |
| Pillow Block Type | Thru-Bolt |
| Bolt Hole Spacing | 4 5/8 in |
| Lubrication | Relubricatable |
| Bearing Insert | G1103KRRB TDCF |
| Shaft Dia. | 1.1875 in |
| Temperature Range [Max] | 250 °F |
| Inch/Metric | Inch |
| Outer Ring Size | 206 |
| Locking Device | Eccentric Locking Collar |
| Bolt Holes | 2 |
| Bearing Type | Ball Bearing |
| Weight | 1.19 LB |
| EAN or UPC | 87796180062 |
-
![HACCP Friendly]()
HACCP Friendly
