- 0.75" Shaft, 1.25" Base to Center, Contact Seals, Eccentric Collar, Non-Expansion Type
description
- Created to handle stringent food handling requirements and serve in highly corrosive applications. All assembly components have been carefully selected to comply with all applicable federal food processing requirements without compromising bearing performance needs. These units are dimensionally stable under load and can operate in continuous temperatures up to 250 °F (brief exposure up to 350 °F).The finish will not scrape or flake off during use.
applications
- Food and beverage
- Material handling
- Dairy and refrigeration
- HVAC
- Chemical industry
- Maritime industry
- Highly corrosive environments
compliances
- 0
| Length Through Bore | 1.34375 in |
| Bearing Design | Non-Expansion |
| Overall Width | 1 43/64 in |
| Series | RAK Series |
| Bolt Hole Length | 25/32 in |
| Mounted Unit Duty | Normal-Duty, Corrosion Resistant-Duty |
| Housing Material | Polymer |
| Bearing Insert | G1012KRRB TDCF |
| Collar O.D. | 1 5/16 in |
| Bolt Holes | 2 |
| Base Height | 15/32 in |
| Locking Device | Eccentric Locking Collar |
| Housing Construction | 1 Piece |
| Shaft Dia. | 0.75 in |
| Seal Type | Contact Seals |
| Lubrication | Relubricatable |
| Pillow Block Type | Thru-Bolt |
| End Type | Open End |
| Bolt Hole Width | 7/16 in |
| Collar No. | S1012K |
| Bearing Type | Ball Bearing |
| Base Length | 5 in |
| Outer Ring Size | 204 |
| Dynamic Load Rating | 3200 lbf |
| Static Load Rating [Max] | 1400 lbf |
| Inch/Metric | Inch |
| Bolt Hole Spacing | 3 25/32 in |
| Housing Height | 2 15/32 in |
| Base Width | 1 1/4 in |
| Temperature Range [Max] | 250 °F |
| Bolt | 3/8 in |
| Weight | 0.772 LB |
| EAN or UPC | 87796180031 |
-
HACCP Friendly


