- 1.5" Shaft, 1.9375" Base to Center, Contact Seals, Eccentric Collar, Non-Expansion Type
description
- Created to handle stringent food handling requirements and serve in highly corrosive applications. All assembly components have been carefully selected to comply with all applicable federal food processing requirements without compromising bearing performance needs. These units are dimensionally stable under load and can operate in continuous temperatures up to 250 °F (brief exposure up to 350 °F).The finish will not scrape or flake off during use.
applications
- Food and beverage
- Material handling
- Dairy and refrigeration
- HVAC
- Chemical industry
- Maritime industry
- Highly corrosive environments
compliances
- 0
| Pillow Block Type | Thru-Bolt |
| Base Height | 3/4 in |
| Shaft Dia. | 1.5 in |
| Static Load Rating [Max] | 4400 lbf |
| Temperature Range [Max] | 250 °F |
| Bolt Hole Length | 1 1/32 in |
| Bearing Type | Ball Bearing |
| Bolt | 1/2 in |
| Bolt Hole Width | 9/16 in |
| Housing Height | 3 15/16 in |
| Seal Type | Contact Seals |
| Overall Width | 2 5/16 in |
| Inch/Metric | Inch |
| Base Length | 7 1/16 in |
| Series | RAS Series |
| Bolt Holes | 2 |
| Dynamic Load Rating | 8150 lbf |
| Mounted Unit Duty | Normal-Duty, Corrosion Resistant-Duty |
| Housing Construction | 1 Piece |
| Locking Device | Eccentric Locking Collar |
| Bolt Hole Spacing | 5 3/8 in |
| Housing Material | Polymer |
| Collar O.D. | 2 3/8 in |
| End Type | Open End |
| Base Width | 1 7/8 in |
| Length Through Bore | 1.6875 in |
| Lubrication | Relubricatable |
| Outer Ring Size | 208 |
| Bearing Design | Non-Expansion |
| Bearing Insert | G1108KRRB TDCF |
| Weight | 2.22 LB |
| EAN or UPC | 87796189065 |
-
HACCP Friendly


