Find a Service Center
- 0.75" Shaft, 1.3125" Base to Center, Contact Seals, Eccentric Collar, Non-Expansion Type
description
- Created to handle stringent food handling requirements and serve in highly corrosive applications. All assembly components have been carefully selected to comply with all applicable federal food processing requirements without compromising bearing performance needs. These units are dimensionally stable under load and can operate in continuous temperatures up to 250 °F (brief exposure up to 350 °F).The finish will not scrape or flake off during use.
applications
- Food and beverage
- Material handling
- Dairy and refrigeration
- HVAC
- Chemical industry
- Maritime industry
- Highly corrosive environments
compliances
- 0
| Seal Type | Contact Seals |
| Base Height | 17/32 in |
| Outer Ring Size | 204 |
| Bolt Hole Length | 25/32 in |
| Bolt | 3/8 in |
| Bearing Design | Non-Expansion |
| End Type | Open End |
| Bolt Hole Spacing | 3 25/32 in |
| Dynamic Load Rating | 3200 lbf |
| Base Length | 5 in |
| Housing Construction | 1 Piece |
| Bearing Insert | G1012KRRB TDCF |
| Length Through Bore | 1.34375 in |
| Locking Device | Eccentric Locking Collar |
| Inch/Metric | Inch |
| Housing Height | 2 17/32 in |
| Bolt Hole Width | 7/16 in |
| Collar No. | S1012K |
| Overall Width | 1 43/64 in |
| Static Load Rating [Max] | 1400 lbf |
| Series | RAS Series |
| Bolt Holes | 2 |
| Pillow Block Type | Thru-Bolt |
| Base Width | 1 1/4 in |
| Mounted Unit Duty | Normal-Duty, Corrosion Resistant-Duty |
| Shaft Dia. | 0.75 in |
| Collar O.D. | 1 5/16 in |
| Lubrication | Relubricatable |
| Bearing Type | Ball Bearing |
| Housing Material | Polymer |
| Temperature Range [Max] | 250 °F |
| Weight | 0.824 LB |
| EAN or UPC | 87796180123 |
-
![HACCP Friendly]()
HACCP Friendly
