Find a Service Center
- 2.9375" Shaft, 4.5625" Base to Center, Contact Seals, Eccentric Collar, Non-Expansion Type
description
- Fafnir RSAO and LSAO type pillow blocks are equipped with GN-KRRB wide inner ring ball bearings, and the LSA series is equipped with GN-KLLB wide inner ring bearings. They are ideally suited for installations where the load is heavy inproportion to the shaft diameter or where considerable shock loads exist. These pillow blocks are prelubricated and ready for immediate use. For wet or extremely dirty conditions, a grease fitting is provided for relubrication if required. All units are supplied with a self-locking collar.
applications
- Agriculture
- Fans and blowers
- Food processing
- Conveyors
| Shaft Dia. | 2.9375 in |
| Inch/Metric | Inch |
| Housing Construction | 1 Piece |
| Housing Width | 8 in |
| Bolt Size | 7/8 in |
| Lubrication | Relubricatable |
| Length Through Bore | 3.9375 in |
| Bolt Hole Length | 1 in |
| Bolt Hole Width | 1 3/8 in |
| Bearing Insert | GN215KRRB |
| Locking Device | Eccentric Locking Collar |
| Bolt Hole Spacing | 12 3/8 in |
| Bolt Holes | 2 |
| Collar No. | SN215K |
| End Type | Open End |
| Collar O.D. | 4 7/16 in |
| Overall Width | 4 3/8 in |
| Bearing Type | Ball Bearing |
| Mounted Unit Duty | Heavy-Duty |
| Housing Height | 8 9/16 in |
| Base Length | 15 3/8 in |
| Bearing Design | Non-Expansion |
| Pillow Block Type | Thru-Bolt |
| Series | RSAO Series |
| Base Width | 4 3/8 in |
| Insert Type | Steel Insert |
| Housing Material | Cast Iron |
| Seal Type | Contact Seals |
| Base Height | 1 7/8 in |
| Weight | 45.07 LB |
| EAN or UPC | 87796061965 |
