Find a Service Center
- 2.9375" Shaft, 4.5625" Base to Center, Contact Seals, Eccentric Collar, Non-Expansion Type
description
- Fafnir RSAO and LSAO type pillow blocks are equipped with GN-KRRB wide inner ring ball bearings, and the LSA series is equipped with GN-KLLB wide inner ring bearings. They are ideally suited for installations where the load is heavy inproportion to the shaft diameter or where considerable shock loads exist. These pillow blocks are prelubricated and ready for immediate use. For wet or extremely dirty conditions, a grease fitting is provided for relubrication if required. All units are supplied with a self-locking collar.
applications
- Agriculture
- Fans and blowers
- Food processing
- Conveyors
| Bolt Holes | 2 |
| Pillow Block Type | Thru-Bolt |
| Bearing Design | Non-Expansion |
| Housing Width | 8 in |
| Collar O.D. | 4 7/16 in |
| Series | RSAO Series |
| Base Height | 1 7/8 in |
| Housing Construction | 1 Piece |
| Collar No. | SN215K |
| Seal Type | Contact Seals |
| Bearing Insert | GN215KRRB |
| Bearing Type | Ball Bearing |
| Bolt Hole Width | 1 3/8 in |
| Locking Device | Eccentric Locking Collar |
| Bolt Size | 7/8 in |
| Base Width | 4 3/8 in |
| Overall Width | 4 3/8 in |
| Insert Type | Steel Insert |
| Housing Height | 8 9/16 in |
| End Type | Open End |
| Bolt Hole Length | 1 in |
| Bolt Hole Spacing | 12 3/8 in |
| Length Through Bore | 3.9375 in |
| Mounted Unit Duty | Heavy-Duty |
| Inch/Metric | Inch |
| Shaft Dia. | 2.9375 in |
| Lubrication | Relubricatable |
| Base Length | 15 3/8 in |
| Housing Material | Cast Iron |
| Weight | 45.07 LB |
| EAN or UPC | 87796061965 |
