Find a Service Center
- 1.4375" Shaft, 2.75" Base to Center, Contact Seals, Concentric Clamp Collar, Non-Expansion Type
description
- Fafnir RSAOC type pillow blocks are equipped with GC-KRRB wide inner ring ball bearings. They are ideally suited for installations where the load is heavy inproportion to the shaft diameter or where considerable shock loads exist. These pillow blocks are prelubricated and ready for immediate use. For wet or extremely dirty conditions, a grease fitting is provided for relubrication if required. All units are supplied with a concentric collar.
applications
- Agriculture
- Fans and blowers
- Food processing
- Conveyors
| Pillow Block Type | Thru-Bolt |
| Housing Construction | 1 Piece |
| Housing Material | Cast Iron |
| Inch/Metric | Inch |
| Bolt Holes | 2 |
| Bearing Type | Ball Bearing |
| Bolt Hole Spacing | 8 1/4 in |
| Seal Type | Contact Seals |
| Bearing Design | Non-Expansion |
| Series | RSAOC Series |
| Base Height | 15/16 in |
| Shaft Dia. | 1.4375 in |
| End Type | Open End |
| Locking Device | Concentric Clamp Collar |
| Base Width | 2 3/4 in |
| Base Length | 10 5/8 in |
| Lubrication | Relubricatable |
| Mounted Unit Duty | Heavy-Duty |
| Insert Type | Steel Insert |
| Housing Height | 4 13/16 in |
| Weight | 9.56 LB |
| EAN or UPC | 87796059306 |
