- 1.4375" Shaft, 2.75" Base to Center, Contact Seals, Concentric Clamp Collar, Non-Expansion Type
description
- Fafnir RSAOC type pillow blocks are equipped with GC-KRRB wide inner ring ball bearings. They are ideally suited for installations where the load is heavy inproportion to the shaft diameter or where considerable shock loads exist. These pillow blocks are prelubricated and ready for immediate use. For wet or extremely dirty conditions, a grease fitting is provided for relubrication if required. All units are supplied with a concentric collar.
applications
- Agriculture
- Fans and blowers
- Food processing
- Conveyors
| Base Width | 2 3/4 in |
| Insert Type | Steel Insert |
| End Type | Open End |
| Housing Material | Cast Iron |
| Pillow Block Type | Thru-Bolt |
| Bolt Holes | 2 |
| Shaft Dia. | 1.4375 in |
| Bearing Design | Non-Expansion |
| Seal Type | Contact Seals |
| Lubrication | Relubricatable |
| Bearing Type | Ball Bearing |
| Base Length | 10 5/8 in |
| Base Height | 15/16 in |
| Housing Height | 4 13/16 in |
| Mounted Unit Duty | Heavy-Duty |
| Inch/Metric | Inch |
| Series | RSAOC Series |
| Bolt Hole Spacing | 8 1/4 in |
| Locking Device | Concentric Clamp Collar |
| Housing Construction | 1 Piece |
| Weight | 9.56 LB |
| EAN or UPC | 87796059306 |

