- Single Row Radial Bearing, 1" ID x 2" OD x 0.375" Wide, Open, Standard Precision (ABEC 1), Steel Cage, Greater Than Normal Clearance (C3)
description
- Extra small ball bearings can sustain radial thrust and combined loads proportionate to the capacities of the small shafts for which they are designed. They are especially suitable for use in fractional horsepower motors, domestic appliances, precision instruments, tape recorders and similar devices. These bearings are electric motor quality for applications where extra quietness is a requirement.
applications
- General industrial
- Automotive
- Agricultural
- Chemical
- Utilities
| Preload Level | None |
| Bearing Type | Radial |
| Outer Ring Width | 3/8 in |
| Capacity | Standard Capacity |
| Cage Material | Steel |
| Rows of Balls | Single |
| Locking Device | No Locking Device |
| No. in Set | Single Bearing |
| Snap Ring | No Snap Ring |
| Ball Material | Steel |
| I.D. | 1 in |
| Material | Steel |
| Width | 3/8 in |
| Seal Type | Unsealed |
| Dynamic Load Rating | 2,500.00 lbf |
| Inner Ring Width | 3/8 in |
| Pre Lubricant | None |
| Cage Type | Metal |
| O.D. | 2 in |
| Precision Level | Standard (ABEC 1) |
| Fillet Radius | 0.031 in |
| Enclosure | Open |
| Radial Internal Clearance | C3 |
| Precision | Standard |
| Seal Material | None |
| Lubricant | Oil Preservative |
| Open Width | 3/8 in |
| Inch/Metric | Inch Bore |
| O.D. Type | Straight |
| Bore Type | Round Bore |
| icNumber | 7697584 |
| Origin | Single Row Radial |
| Contact Angle | 0° |
| Radial Internal Clearance Specification | Greater Than Normal Clearance |
| Closed Width | 1/2 in |
| Static Load Rating [Max] | 1,120.00 lbf |
| Weight | 0.198 LB |
| EAN or UPC | 87796044814 |
| NSN Number | 3110-00-293-9092 |

