Find a Service Center
- Single Row Radial Bearing, 1" ID x 2" OD x 0.375" Wide, Open, Standard Precision (ABEC 1), Steel Cage, Greater Than Normal Clearance (C3)
description
- Extra small ball bearings can sustain radial thrust and combined loads proportionate to the capacities of the small shafts for which they are designed. They are especially suitable for use in fractional horsepower motors, domestic appliances, precision instruments, tape recorders and similar devices. These bearings are electric motor quality for applications where extra quietness is a requirement.
applications
- General industrial
- Automotive
- Agricultural
- Chemical
- Utilities
| I.D. | 1 in |
| Contact Angle | 0° |
| Radial Internal Clearance Specification | Greater Than Normal Clearance |
| Radial Internal Clearance | C3 |
| Capacity | Standard Capacity |
| Locking Device | No Locking Device |
| Pre Lubricant | None |
| Inner Ring Width | 3/8 in |
| Snap Ring | No Snap Ring |
| Material | Steel |
| Enclosure | Open |
| icNumber | 7697584 |
| Seal Material | None |
| Fillet Radius | 0.031 in |
| Rows of Balls | Single |
| Closed Width | 1/2 in |
| Open Width | 3/8 in |
| Origin | Single Row Radial |
| Lubricant | Oil Preservative |
| O.D. | 2 in |
| Bearing Type | Radial |
| Precision Level | Standard (ABEC 1) |
| Dynamic Load Rating | 2,500.00 lbf |
| No. in Set | Single Bearing |
| Cage Material | Steel |
| Bore Type | Round Bore |
| Inch/Metric | Inch Bore |
| Width | 3/8 in |
| Outer Ring Width | 3/8 in |
| Precision | Standard |
| Cage Type | Metal |
| Seal Type | Unsealed |
| Static Load Rating [Max] | 1,120.00 lbf |
| Ball Material | Steel |
| O.D. Type | Straight |
| Preload Level | None |
| Weight | 0.198 LB |
| EAN or UPC | 87796044814 |
| NSN Number | 3110-00-293-9092 |
