Find a Service Center
- Single Row Radial Bearing, 1.125" ID x 2.125" OD x 0.375" Wide, Open, Standard Precision (ABEC 1), Steel Cage, Greater Than Normal Clearance (C3)
description
- Extra small, 30 Metric series ball bearings can sustain radial, thrust and combined loads proportionate to the capacities of the small shafts for which they are designed. They are especially suitable for use in fractional horsepower motors, domestic appliances, precision instruments, tape recorders and similar devices. These bearings are electric motor quality for applications where extra quietness is a requirement. Some sizes in this series are available in stainless steel.When ordering, these are denoted by a prefix A before the bearing number. (e.g.: A38K)
applications
- General industrial
- Automotive
- Agricultural
- Chemical
- Utilities
| Bearing Type | Radial |
| Radial Internal Clearance | C3 |
| Precision | Standard |
| O.D. | 2.125 in |
| Seal Type | Unsealed |
| Inner Ring Width | 3/8 in |
| Cage Type | Metal |
| Lubricant | Oil Preservative |
| Fillet Radius | 0.031 in |
| Inch/Metric | Inch Bore |
| O.D. Type | Straight |
| No. in Set | Single Bearing |
| Capacity | Standard Capacity |
| Enclosure | Open |
| Precision Level | Standard (ABEC 1) |
| Contact Angle | 0° |
| Ball Material | Steel |
| Outer Ring Width | 3/8 in |
| Static Load Rating [Max] | 1220 lbf |
| Width | 3/8 in |
| Locking Device | No Locking Device |
| Origin | Single Row Radial |
| Cage Material | Steel |
| Bore Type | Round Bore |
| Seal Material | None |
| Dynamic Load Rating | 2650 lbf |
| Rows of Balls | Single |
| Preload Level | None |
| Snap Ring | No Snap Ring |
| I.D. | 1 1/8 in |
| icNumber | 7697583 |
| Pre Lubricant | None |
| Radial Internal Clearance Specification | Greater Than Normal Clearance |
| Material | Steel |
| Weight | 0.35 LB |
| EAN or UPC | 87796040465 |
| NSN Number | 3110-00-155-8899 |
