Find a Service Center
- Single Row Radial Bearing, 0.25" ID x 0.75" OD x 0.28125" Wide, Double Shielded (Non-Contact), Standard Precision (ABEC 1), Steel Cage, Greater Than Normal Clearance (C3)
description
- Extra small ball bearings can sustain radial thrust and combined loads proportionate to the capacities of the small shafts for which they are designed. They are especially suitable for use in fractional horsepower motors, domestic appliances, precision instruments, tape recorders and similar devices. These bearings are electric motor quality for applications where extra quietness is a requirement.
applications
- General industrial
- Automotive
- Agricultural
- Chemical
- Utilities
| Rows of Balls | Single |
| Ball Material | Steel |
| Seal Type | Non-Contact Seals |
| O.D. Type | Straight |
| Dynamic Load Rating | 695.00 lbf |
| Cage Type | Metal |
| Outer Ring Width | 9/32 in |
| Temperature Range [Max] | 275 °F |
| Lubricant | Polyurea Base |
| No. in Set | Single Bearing |
| Closed Width | 9/32 in |
| Contact Angle | 0° |
| Static Load Rating [Max] | 260.00 lbf |
| Enclosure | Double Shielded |
| Seal Material | Metal |
| Temperature Range [Min] | -30 °F |
| Locking Device | No Locking Device |
| Origin | Single Row Radial |
| Material | Steel |
| Radial Internal Clearance | C3 |
| Width | 9/32 in |
| Precision | Standard |
| Fillet Radius | 0.016 in |
| Cage Material | Steel |
| Radial Internal Clearance Specification | Greater Than Normal Clearance |
| Capacity | Standard Capacity |
| Snap Ring | No Snap Ring |
| O.D. | 3/4 in |
| Preload Level | None |
| Bore Type | Round Bore |
| Precision Level | Standard (ABEC 1) |
| I.D. | 1/4 in |
| Bearing Type | Radial |
| Inch/Metric | Inch Bore |
| Inner Ring Width | 9/32 in |
| Open Width | 7/32 in |
| icNumber | 7696495 |
| Weight | 0.044 LB |
| EAN or UPC | 87796044142 |
