Find a Service Center
- Single Row Radial Bearing, 0.25" ID x 0.75" OD x 0.28125" Wide, Double Shielded (Non-Contact), Standard Precision (ABEC 1), Steel Cage, Greater Than Normal Clearance (C3)
description
- Extra small ball bearings can sustain radial thrust and combined loads proportionate to the capacities of the small shafts for which they are designed. They are especially suitable for use in fractional horsepower motors, domestic appliances, precision instruments, tape recorders and similar devices. These bearings are electric motor quality for applications where extra quietness is a requirement.
applications
- General industrial
- Automotive
- Agricultural
- Chemical
- Utilities
| Capacity | Standard Capacity |
| Material | Steel |
| Closed Width | 9/32 in |
| Snap Ring | No Snap Ring |
| No. in Set | Single Bearing |
| Precision | Standard |
| Temperature Range [Max] | 275 °F |
| Precision Level | Standard (ABEC 1) |
| Radial Internal Clearance | C3 |
| Origin | Single Row Radial |
| icNumber | 7696495 |
| Cage Material | Steel |
| Bore Type | Round Bore |
| Locking Device | No Locking Device |
| I.D. | 1/4 in |
| Preload Level | None |
| O.D. Type | Straight |
| Inch/Metric | Inch Bore |
| Enclosure | Double Shielded |
| Outer Ring Width | 9/32 in |
| Temperature Range [Min] | -30 °F |
| Lubricant | Polyurea Base |
| Dynamic Load Rating | 695.00 lbf |
| Fillet Radius | 0.016 in |
| Open Width | 7/32 in |
| Static Load Rating [Max] | 260.00 lbf |
| Bearing Type | Radial |
| Width | 9/32 in |
| Radial Internal Clearance Specification | Greater Than Normal Clearance |
| Rows of Balls | Single |
| Cage Type | Metal |
| Seal Material | Metal |
| Ball Material | Steel |
| Inner Ring Width | 9/32 in |
| Seal Type | Non-Contact Seals |
| Contact Angle | 0° |
| O.D. | 3/4 in |
| Weight | 0.044 LB |
| EAN or UPC | 87796044142 |
