Find a Service Center
- Single Row Radial Bearing, 1/4" ID x 3/4" OD x 9/32" Wide, Double Sealed (Contact), Standard Precision (ABEC 1), Steel Cage, Greater Than Normal Clearance (C3)
description
- Extra small ball bearings can sustain radial thrust and combined loads proportionate to the capacities of the small shafts for which they are designed. They are especially suitable for use in fractional horsepower motors, domestic appliances, precision instruments, tape recorders and similar devices. These bearings are electric motor quality for applications where extra quietness is a requirement.
applications
- Automotive
- Agricultural
- Chemical
- Utilities
- General industrial
| I.D. | 1/4 in |
| Preload Level | None |
| Radial Internal Clearance | C3 |
| Lubricant | Polyurea Base |
| Contact Angle | 0° |
| Locking Device | No Locking Device |
| Open Width | 7/32 in |
| No. in Set | Single Bearing |
| Radial Internal Clearance Specification | Greater Than Normal Clearance |
| Fillet Radius | 0.016 in |
| Material | Steel |
| Inner Ring Width | 9/32 in |
| Cage Type | Metal |
| Seal Material | Buna-N |
| Bearing Type | Radial |
| Ball Material | Steel |
| icNumber | 7696538 |
| O.D. Type | Straight |
| Cage Material | Steel |
| Bore Type | Round Bore |
| Closed Width | 9/32 in |
| Snap Ring | No Snap Ring |
| O.D. | 3/4 in |
| Dynamic Load Rating | 695.00 lbf |
| Outer Ring Width | 9/32 in |
| Origin | Single Row Radial |
| Rows of Balls | Single |
| Precision | Standard |
| Static Load Rating [Max] | 260.00 lbf |
| Inch/Metric | Inch Bore |
| Width | 9/32 in |
| Temperature Range [Min] | -30 °F |
| Enclosure | Double Sealed |
| Temperature Range [Max] | 275 °F |
| Seal Type | Contact Seals |
| Capacity | Standard Capacity |
| Precision Level | Standard (ABEC 1) |
| Weight | 0.17 LB |
| EAN or UPC | 87796074712 |
