Find a Service Center
- Single Row Radial Bearing, 1/4" ID x 3/4" OD x 9/32" Wide, Double Sealed (Contact), Standard Precision (ABEC 1), Steel Cage, Greater Than Normal Clearance (C3)
description
- Extra small ball bearings can sustain radial thrust and combined loads proportionate to the capacities of the small shafts for which they are designed. They are especially suitable for use in fractional horsepower motors, domestic appliances, precision instruments, tape recorders and similar devices. These bearings are electric motor quality for applications where extra quietness is a requirement.
applications
- Automotive
- Agricultural
- Chemical
- Utilities
- General industrial
| Material | Steel |
| Snap Ring | No Snap Ring |
| Radial Internal Clearance Specification | Greater Than Normal Clearance |
| Precision Level | Standard (ABEC 1) |
| Dynamic Load Rating | 695.00 lbf |
| Open Width | 7/32 in |
| Capacity | Standard Capacity |
| Outer Ring Width | 9/32 in |
| Ball Material | Steel |
| O.D. Type | Straight |
| Cage Type | Metal |
| Rows of Balls | Single |
| Inner Ring Width | 9/32 in |
| Closed Width | 9/32 in |
| Origin | Single Row Radial |
| Temperature Range [Max] | 275 °F |
| I.D. | 1/4 in |
| Seal Type | Contact Seals |
| icNumber | 7696538 |
| Static Load Rating [Max] | 260.00 lbf |
| Radial Internal Clearance | C3 |
| Cage Material | Steel |
| Temperature Range [Min] | -30 °F |
| Locking Device | No Locking Device |
| Width | 9/32 in |
| Bore Type | Round Bore |
| No. in Set | Single Bearing |
| Enclosure | Double Sealed |
| Contact Angle | 0° |
| Fillet Radius | 0.016 in |
| O.D. | 3/4 in |
| Seal Material | Buna-N |
| Inch/Metric | Inch Bore |
| Precision | Standard |
| Bearing Type | Radial |
| Lubricant | Polyurea Base |
| Preload Level | None |
| Weight | 0.17 LB |
| EAN or UPC | 87796074712 |
