Find a Service Center
- Single Row Radial Bearing, 0.25" ID x 0.625" OD x 0.196" Wide, Double Sealed (Contact), Standard Precision (ABEC 1), Steel Cage, Greater Than Normal Clearance (C3)
description
- Extra small ball bearings can sustain radial thrust and combined loads proportionate to the capacities of the small shafts for which they are designed. They are especially suitable for use in fractional horsepower motors, domestic appliances, precision instruments, tape recorders and similar devices. These bearings are electric motor quality for applications where extra quietness is a requirement.
applications
- General industrial
- Automotive
- Agricultural
- Chemical
- Utilities
| Bore Type | Round Bore |
| Ball Material | Steel |
| Material | Steel |
| Outer Ring Width | 0.196 in |
| Enclosure | Double Sealed |
| Width | 0.196 in |
| Bearing Type | Radial |
| Preload Level | None |
| Static Load Rating [Max] | 125.00 lbf |
| Capacity | Standard Capacity |
| Open Width | 0.196 in |
| Locking Device | No Locking Device |
| Dynamic Load Rating | 365.00 lbf |
| I.D. | 1/4 in |
| Cage Type | Metal |
| Snap Ring | No Snap Ring |
| Radial Internal Clearance Specification | Greater Than Normal Clearance |
| Closed Width | 0.196 in |
| Seal Material | Buna-N |
| Precision Level | Standard (ABEC 1) |
| Inch/Metric | Inch Bore |
| icNumber | 7696114 |
| Origin | Single Row Radial |
| Precision | Standard |
| No. in Set | Single Bearing |
| Temperature Range [Max] | 275 °F |
| Temperature Range [Min] | -30 °F |
| O.D. Type | Straight |
| Inner Ring Width | 0.196 in |
| Rows of Balls | Single |
| Fillet Radius | 0.012 in |
| Radial Internal Clearance | C3 |
| Seal Type | Contact Seals |
| Lubricant | Polyurea Base |
| O.D. | 5/8 in |
| Contact Angle | 0° |
| Cage Material | Steel |
| Weight | 0.022 LB |
| EAN or UPC | 87796044173 |
