Find a Service Center
- Single Row Radial Bearing, 0.375" ID x 0.875" OD x 0.28125" Wide, Single Shield (Non-Contact), Standard Precision (ABEC 1), Steel Cage, Greater Than Normal Clearance (C3)
description
- Extra small, 30 Metric series ball bearings can sustain radial, thrust and combined loads proportionate to the capacities of the small shafts for which they are designed. They are especially suitable for use in fractional horsepower motors, domestic appliances, precision instruments, tape recorders and similar devices. These bearings are electric motor quality for applications where extra quietness is a requirement. Some sizes in this series are available in stainless steel.When ordering, these are denoted by a prefix A before the bearing number. (e.g.: A38K)
applications
- General industrial
- Automotive
- Agricultural
- Chemical
- Utilities
| Origin | Single Row Radial |
| Cage Type | Metal |
| Locking Device | No Locking Device |
| O.D. | 0.875 in |
| Contact Angle | 0° |
| icNumber | 7699231 |
| Snap Ring | No Snap Ring |
| Radial Internal Clearance | C3 |
| Inch/Metric | Inch Bore |
| Dynamic Load Rating | 830 lbf |
| I.D. | 3/8 in |
| Ball Material | Steel |
| Capacity | Standard Capacity |
| Precision | Standard |
| Material | Steel |
| Outer Ring Width | 9/32 in |
| Width | 9/32 in |
| Rows of Balls | Single |
| Cage Material | Steel |
| Preload Level | None |
| Radial Internal Clearance Specification | Greater Than Normal Clearance |
| Bore Type | Round Bore |
| O.D. Type | Straight |
| Seal Material | Metal |
| Seal Type | Non-Contact Seals |
| Precision Level | Standard (ABEC 1) |
| Inner Ring Width | 9/32 in |
| Enclosure | Single Shield |
| No. in Set | Single Bearing |
| Static Load Rating [Max] | 312 lbf |
| Bearing Type | Radial |
| Fillet Radius | 0.016 in |
| Pre Lubricant | None |
| Lubricant | Oil Preservative |
| Weight | 0.17 LB |
| EAN or UPC | 87796044210 |
| NSN Number | 3110-00-155-8413 |
