Find a Service Center
- Single Row Radial Bearing, 0.375" ID x 0.875" OD x 9/32" Wide, Double Sealed (Contact), Standard Precision (ABEC 1), Steel Cage, Greater Than Normal Clearance (C3)
description
- Extra small ball bearings can sustain radial thrust and combined loads proportionate to the capacities of the small shafts for which they are designed. They are especially suitable for use in fractional horsepower motors, domestic appliances, precision instruments, tape recorders and similar devices. These bearings are electric motor quality for applications where extra quietness is a requirement.
applications
- General industrial
- Automotive
- Agricultural
- Chemical
- Utilities
| Seal Material | Buna-N |
| Capacity | Standard Capacity |
| Closed Width | 9/32 in |
| Cage Type | Metal |
| I.D. | 3/8 in |
| icNumber | 7696119 |
| Locking Device | No Locking Device |
| Bearing Type | Radial |
| Contact Angle | 0° |
| Origin | Single Row Radial |
| Preload Level | None |
| Ball Material | Steel |
| Inch/Metric | Inch Bore |
| Material | Steel |
| Precision | Standard |
| Radial Internal Clearance | C3 |
| Static Load Rating [Max] | 312.00 lbf |
| Lubricant | Polyurea Base |
| O.D. Type | Straight |
| Outer Ring Width | 9/32 in |
| Fillet Radius | 0.016 in |
| Width | 9/32 in |
| Bore Type | Round Bore |
| Seal Type | Contact Seals |
| Cage Material | Steel |
| No. in Set | Single Bearing |
| Precision Level | Standard (ABEC 1) |
| Dynamic Load Rating | 830.00 lbf |
| Temperature Range [Min] | -30 °F |
| Open Width | 7/32 in |
| Rows of Balls | Single |
| Snap Ring | No Snap Ring |
| O.D. | 7/8 in |
| Radial Internal Clearance Specification | Greater Than Normal Clearance |
| Temperature Range [Max] | 275 °F |
| Inner Ring Width | 9/32 in |
| Enclosure | Double Sealed |
| Weight | 0.044 LB |
| EAN or UPC | 87796044272 |
| NSN Number | 3110-00-520-3877 |
